 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 600 Series SmartViewTM Description SmartViewTM is a dynamic, feature-rich, graphical fire alarm monitoring software and interface hardware system for the Gamewell-FCI IdentiFlex 600 Series of addressable fire alarm control panels. Gamewell-FCI's SmartViewTM system includes workstation software -- a Microsoft(R) Windows(R) 2000-based graphical user interface. SmartView(R)'s software is designed to be easy to configure and simple to operate. SmartView(R) presents information through a graphical menu system and dynamic color display while operating over a high-speed Ethernet LAN/WAN or single-user network. Similar to a website, the menu pages feature user-defined "hot spots" that either launch a task-specific application or direct users to another menu page. The system utilizes custom fire alarm icons to display point-specific alarm information. Each alarm event is displayed on a color-coded alarm display, or with its floor plan pinpointing the exact location of the alarm. Point-specific user instructions can also be displayed. All events and user actions are logged for creating user-selected customized reports. To enhance user accessibility, event information can also be broadcast to pagers or emailed via an optional Internet connection. SmartViewTM can monitor an individual IdentiFlex 600 Series addressable fire alarm panel, or an entire SmartNetTM/SmartLinkTM network. The SmartViewTM system supports up to three SmartViewTM workstations as standard; for systems that require four or more workstations, please consult the factory. Included with each unit of SmartViewTM software is a net communications central processing unit with 8 MB DRAM, 4 MB flash, a math coprocessor, communication ports, Gamewell-FCI 600 Series fire alarm panel interface, and power supply. Graphical Monitoring Software and Interface Hardware System Features SmartView * Fire alarm monitoring software operating on Windows(R) 2000/XP Professional operating system software. * Compatible with all Gamewell-FCI IdentiFlex 600 Series fire alarm panels. * Ethernet TCP/IP net controller. * High-speed networking. * Power supply with UPS battery backup. * SQL database. * Supports up to three workstations standard with P/N SV-MWS. * SmartLinkTM peer-to-peer compatible. * Fully supervised. * NetController features flash memory for easy on-line software updates. * Optional Internet connection. * Paging and email compatible. * Easy configuration. * Familiar interface similar to Windows(R) Explorer. * Event logs with modifiable "listviews" for customized reports. * Select event-specific icons. * Color-coded alarm bar and Customize graphics. * Display multiple floor plans and user instructions. * Multiple workstation support. Microsoft(R) Windows(R) is a registered trademark of Microsoft(R) Corporation. SmartViewTM, SmartNetTM and SmartLinkTM are trademarks of Honeywell International Inc. GAMEWELL-FCI Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use. (c)2007 Honeywell International Inc. All rights reserved. www.gamewell-fci.com CS-2150 Rev. A page 1 of 2 12 Clintonville Road, Northford, CT 06472-1610 USA * Tel: (203) 484-7161 * Fax: (203) 484-7118 g2150scl.jpg Specifications Net communications and power supply: Operating +32F to +120F (0C to +49C). Temperature: Relative Humidity: 10% to 95% non-condensing. Input Voltage: 100-240 VAC, 50/60 Hz Power Consumption: 10 watts. Overload Protection: 3.0A resettable fuse TVS protection. Battery Backup/UPS: UPS circuit with built-in trickle charger included. Provides four (4) hours of backup time with two (2), 12-volt, 7.0 AH batteries (not included). PC hardware requirements: PC with 750 MHz (or higher) processor, 256 MB (minimum) RAM, 10 GB (minimum) hard drive. CD-RW drive. 10/100 baseT Ethernet card. 19" (48.26 cm) diagonal (minimum) monitor screen, display set to 1024 x 768. Operating system: Microsoft(R) Windows(R) 2000/XP Professional. Ordering Information Model SV-SWS Description Single workstation system, including operating software, SV-NC, SV-PS, and enclosure. Multiple workstation system including up to three workstations, including operating software, SV-NC, SV-PS, and enclosure. Workstation software required for each additional workstation PC. Net communications unit with Gamewell-FCI driver (fiber). Net communications unit with Gamewell-FCI driver. Power supply. SV-MWS SV-MWOS SV-NC-F SV-NC SV-PS GAMEWELL-FCI 12 Clintonville Road, Northford, CT 06472-1610 USA * Tel: (203) 484-7161 * Fax: (203) 484-7118 www.gamewell-fci.com CS-2150 Rev. A page 2 of 2 |
Price & Availability of SV-NC-F
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |